Electric pallet stacker are widely used in factory workshops, warehouses, circulation centers and distribution centers, ports, stations, airports, etc., and can enter cabins, carriages, and containers for loading, unloading and handling of palletized goods. It is an indispensable equipment for pallet transportation and container transportation.
1.Electric Pallet Stacker
Electric pallet stacker are widely used in factory workshops, warehouses, circulation centers and distribution centers, ports, stations, airports, etc., and can enter cabins, carriages, and containers for loading, unloading and handling of palletized goods. It is an indispensable equipment for pallet transportation and container transportation.
Stacker trucks refer to various wheeled trucks for loading and unloading, stacking, stacking and short-distance transportation of palletized goods.
2.Electric Pallet Stacker Specification
Main Parameters of CDD Stacker |
||||
Basic parameters |
1 |
Product model |
|
CDD |
|
2 |
Driving mode |
|
Electric |
3 |
Operation method |
|
Stand-on model |
|
4 |
Rated load |
Q kg |
1000、1500、2000 |
|
5 |
Load center |
C mm |
500 |
|
6 |
Axle base |
Y mm |
1480 |
|
7 |
Dead weight (excluding battery) |
kg |
680 |
|
Wheel |
1 |
Tire |
|
PU wheel |
2 |
Dimensions of driving wheel |
mm |
∅250×80 |
|
3 |
Size of front wheel |
mm |
∅80×70 |
|
4 |
Dimensions of balance wheel |
mm |
∅125×50 |
|
5 |
Quantity of wheels (front/rear) (x= driving wheel) |
|
1x+2/4 |
|
6 |
Front wheel track |
mm |
510 |
|
7 |
Rear wheel track |
mm |
620 |
|
Basic dimension |
1 |
Overall height (when the fork is the lowest) |
h1 mm |
2080 |
2 |
Overall height (when the fork is the highest) |
h2 mm |
3380 |
|
3 |
Lifting height |
h3 mm |
3000 |
|
4 |
Free lifting height |
h4 mm |
0 |
|
5 |
Ground height of fork (when the fork is the lowest) |
h5 mm |
85 |
|
6 |
Ground height of the operating handle (maximum / minimum) |
h6 mm |
1450/1020 |
|
7 |
Total length |
L1 mm |
2030 |
|
8 |
Distance from the front end of the fork to the front part |
L2 mm |
1000 |
|
9 |
Total width |
b1 mm |
860 |
|
10 |
Dimensions of fork (metal plate) |
s/e/Imm |
160*50*1000 |
|
11 |
Outer width of fork |
b3 mm |
680/550 |
|
12 |
Minimum ground clearance |
m mm |
35 |
|
13 |
Width of the right-angle stacking channel, tray 1,000x1,200 (1,200: along the fork edge) |
Ast mm |
2500 |
|
14 |
Turning radius |
R mm |
1800 |
|
Property |
1 |
Driving speed full load / no load |
km/h |
4.5/5.5 |
2 |
Lifting speed full load / no load |
mm/s |
50/100 |
|
3 |
Load-lowering speed full load / no load |
mm/s |
140/135 |
|
4 |
The maximum gradeability full load / no load |
% |
5.0/8.0 |
|
5 |
Brake mode |
|
Electromagnetic brake |
|
Motor |
1 |
Driving motor power |
kw |
1.5 |
2 |
Lifting motor power |
kw |
2.2 |
|
3 |
Battery voltage/capacity |
V/Ah |
24/120/210 |
|
4 |
Power cell weight |
kg |
70/195 |
3. Electric Pallet Stacker Feature And Application
Electric Pallet Stacker refer to various wheeled trucks for loading and unloading, stacking, stacking and short-distance transportation of palletized goods.
4.Electric Pallet Stacker Details
Fork made of manganese steel, high toughness and strong endurance; the bottom of the fork has stiffeners for more durability
There are adjusting screws inside the fork; the fork rocker is a galvanized solid rod, which is strong and not easy to rust, and is more durable
The wheel frame is integrally stamped by the mold, which is more stable in use.
The wheel material is polyurethane Pu wheel, which has good mute effect
The door frame is made of manganese steel and genuine C-shaped steel. The door frame has reinforcing ribs, which is not easy to deform and break.
Chain National standard chain, sturdy and strong for test load
Oil cylinder Sealed oil pipe, no oil leakage, no air leakage and easy maintenance
Motor and charger Highly equipped with high-quality brand batteries, special batteries for electric forklifts. It can work continuously for 5-7 hours. The working time of the battery varies slightly depending on the specific carrying capacity.
The outer cover adopts an integral forming process, with a reinforcement layer on the outside, which is not easy to deform and change color.
The handle of the handle is different from the thin handles on the market. The thin handle is easy to break. Our handle is stamped and formed by a special mold, which is strong and durable. The handle has a switch button, a horn button, a fork up and down adjustment button, and an anti-collision switch. Convenient and safer.
5. Product Qualification
Shanghai Yiying Crane Machinery Company is the hoist manufacturer Institute certified. This means we are one of the industry’s leading suppliers of hoist equipment. We are reliable and deliver exceptional value.
Shanghai Yiying Crane machinery Company supply 380V 440V 415V electric hoist 2ton.it is the most popular in Asia ,America and Canada ,It is beautiful ,strong and durable.we promise the electric hoist 2ton warranty is 2 years.and the hand cable is warterproofed,and we really welcome the treaders around the world join in us .
6. Deliver,Shipping And Serving
Usually the production is completed in 3 days, and it can be made to order in an urgent manner, and the production is fully controlled, and the goods will be delivered in 3 days nationwide.
7.FAQ
1. What is the common model?
Common model 1ton 2ton .lifting height from 1.6m to 3m. We can also do the customized model for you.
2. What’s the information should I provide when inquiry?
Thanks for your question. The more information you provide, the accurate solution we can prepare for you! The information such as the lift capacity, span, lift height, or other specials you give us will be more appreciated.
3. What is your MOQ ?
1 pc it is available.
4. What’s the information should I provide when inquiry?
Lifting capacity, lifting height and quantity is needed.